LF-8800 and LF-8800TP Xytronic Lead Free Digital Soldering and Desoldering Stations
 |
|
| Lead Free ESD Safe Intelligent Temperature Controlled Station |
Both station package prices below
include 426DLX Fume Extractor
ESD Safe with Zero Switching
Separate stand with built-in tip cleaner
CE Certificate
Manual for LF-8800 |
| Larger image of LF-8800 soldering station |
|
LF-8800 is a combined soldering and desoldering station specially designed for lead free soldering/desoldering to meet RoHS requirements. The station has a built-in vacuum pump and incorporates electronic circuitry which enables the user to set the soldering tip temperature between 150°C (302°F) and 480°C (896°F) and desoldering tip temperature between 300°C (572°F) and 450°C (842°F) without changing tips or heating elements. Temperature is maintained within ±3°C (±6°F) of its operating temperature by a thermocouple sensor in the iron. Station comes with standard soldering tip part # 44-710652 (0.5mm) and standard desoldering tip part # 44-915412 (1.2mm). Both soldering/desoldering station packages below come with a 426DLX fume extractor included in the price.
Product Features:
- Heater/Sensor Fail Detection: If sensor circuit fails the display reads "S--E" and cuts off the heater power. If heater circuit fails the display will read "H--E" and cut off the heater power.
- Temperature "Lock-Out" Feature: The temperature can be locked by "password" code that is convenient for production line management.
- ESD Safe and Spike Free Circuitry: The "Zero Voltage" electronic switching design also protects voltage and current sensitive components (CMOS devices, etc.) against damaging current and transient voltage spikes commonly produced by less efficient, mechanically switched stations.
- Delayed Suction: To eliminate the problem of solder clogging up the tip, a delayed switch feature has been incorporated for the unit that allows the pump to continue sucking for 1.5 seconds after the actuator switch is released.
- Lightweight Soldering Iron: Ergonomic mini handle that stays cool and prevents operator fatigue.
- Energy Saver Mode: If the station has been idle for 20 minutes, the energy saver feature will automatically engage, the temperature goes down to 150°C from the set temperature. Activating the solder/desolder wands will disengage the power saving feature and the unit will immediately ramp up to the preset temperature. When over 40 minutes without operation the main power will be switched off to "sleep mode" which cuts power consumption and extends tip life.
Please note: You have to switch off the unit first and then switch "ON" again to commence work when the unit goes to "Sleep" mode.
- Iron Working Option: Both soldering, desoldering irons
can be used at the same time. You can also set by pressing keys " SET +
▲" when you only use soldering or desoldering iron. At this time, the
iron which you set will enter the power off suspend status. It means
that the heater power is cut off. If press "▼" then the heater power will
be on.
- Optional SMD Tweezers: The additional feature is specially designed for SMD chips, SOT, Flat pack ICs etc. reworking. TWZ90 Tweezers can be interchangeable with soldering iron as an option. Be sure before proceeding with this operation, the main switch must be "OFF" to avoid any damage to the unit.
- LF-8800 replacement soldering iron part number: 307A.
- LF-8800 replacement desoldering iron part number: DIA100.
Soldering and Desoldering Station Specifications:
Lead Free Soldering Tips for LF-2000, LF-8800 and LF-8800TP Soldering Stations
|
View cart |
|
| |
 |
|
| |
| |
| |
| |
| |
| |
| |
| |
| Desoldering Tips for LF-8800 and LF-8800TP |
View cart |
| |
 |
|
|
 |
|
|
 |
|
|
|
|
Larger image of solder pot
