  Through Hole 0.1" Spacing With 0.05" Offset100% support of the though hole components with the 0.1" spacing pitch. 12 ground holes are connected to a copper plane on the bottom side. Components such as capacitors, resistors, diodes, inductors, crystals, headers, jumpers, fuses, transistors, voltage regulators, DIP IC 70 pins or sockets, DIP switches, relays, RJ11, RJ45 connectors etc. are supported. 2" X 2" grid.
Click here for a detailed diagram.
When you buy the pack of 10 you save 20% over buying the board individually.
2CO is the authorized retailer for E.L. Inc. [ Engineering Lab ]
|
|
