The Schmartboard circuit board prototyping system is the fastest and easiest electronic circuit prototyping system ever conceived. Schmartboard is the only circuit board prototyping system that allows one to work on one circuit block at a time, test the blocks individually, and then physically connect the blocks together. Here's
how the circuit board system works.
Connect your Schmartboard circuit boards with our mechanical
bridges. We offer assorted sizes of
jumpers and headers.
Watch a quick flash on the
Schmartboard
circuit board system.
|
Through Hole
Circuit Board
- 3/4 of the circuit board our signature offset traced rows of holes
- 1/4 of the circuit board with untraced holes
- Long enough for any DIP
- Every 10th row, silk-screened to help with part placement
- Two columns of power and ground strips
- Easy ground connection to the mounting holes
- PCB is scored to break in half if chosen
- 4" x 4" grid
|
|
| |
|
| |
|
|
Through Hole
Circuit Board - 0.1" Spacing with 0.05" Offset
Circuit board offers 100% support of the thru hole components with the 0.1"
spacing pitch. 12 ground holes are connected a copper plane on the bottom
side. Components such as capacitor, resistor, diode, inductor, crystal,
headers, jumpers, fuse, transistors, voltage regulators, DIP IC 70 pins or
sockets, DIP switches, relay, RJ11, RJ45 connector etc. are supported with
this circuit board. 2" x 2" grid.
|
|
| |
|
| |
|
|
Through Hole
Circuit Board - 2mm Spacing with 1mm Offset
Circuit board offers 100% support of the through-hole components with the 1mm spacing pitch. 12 ground holes are connected a copper plane on the bottom side. Components such as capacitors, resistors, diodes, inductors, crystals, headers, jumpers, fuses etc. are supported with this circuit board. 2" x 2" grid.
|
|
| |
|
| |
|
|
Through Hole
Circuit Board - Power and Ground Strip
Circuit board to connect the power source or ground. 0.5" x 2" grid.
|
|
| |
|
| |
|
|
Through Hole
Board - Power Connector & Power Jack
Circuit board supports 1 piece drive power connector and 1 piece power jack. 12 ground holes are connected a copper plane on the bottom side. 0.5" x 2" grid.
|
|
| |
|
| |
|
|
Through Hole
Circuit Board - ATX Power Connector
Circuit board offers support for 1 piece ATX 20 pins power connector. 10
ground holes are connected a copper plane on the bottom side. 0.5" x 2" grid.
|
|
| |
|
| |
|
|
Through Hole
Circuit Board - Audio/RCA Jack
Circuit board offers support for 2 RCA jack and 1 3.5mm phone jack. 4 ground holes are connected a copper plane on the bottom side. 0.5" x 2" grid.
|
|
| |
|
| |
|
|
Through Hole
Circuit Board - DB 25 Connector
Circuit board offers support for DSUB connector from 9 to 25 pins. 4 ground holes are connected a copper plane on the bottom side. 0.5" x 2" grid.
|
|
| |
|
| |
|
|
Through Hole
Board - JTAG 20 Pins 0.1" SP & IEEE1394 Connector
Circuit board offers support for 1 JTAG connector 20 pins and 1 IEEE1394 connector. 4 ground holes are connected a copper plane on the bottom side. 0.5" x 2" grid.
|
|
| |
|
| |
|
|
Through Hole
Circuit Board - RGB 15 Pins Connector
Circuit board offers support for 1 RGB 15 pins connector. 4 ground holes are connected a copper plane on the bottom side. 0.5" x 2" grid.
|
|
| |
|
| |
|
|
Through Hole
Circuit Board - Switches
Circuit board offers support for 4 different type of switches. 12 ground holes are connected a copper plane on the bottom side. 0.5" x 2" grid.
|
|
| |
|
| |
|
|
Through Hole
Circuit Board - RJ11/45 & USB Connector
Circuit board offers support for 1 RJ11 OR RJ45 connector and 1 USB Type B connector. 8 ground holes are connected a copper plane on the bottom side. 0.5" x 2" grid.
|
|
| |
|
| |
|
