Lead Free Soldering Pot Goot POT-51C

Extremely Accurate PID Temperature Controlled
Lead Free Solder Pot For Small Process PC Boards

Larger image of the 51C solder pot.

The goot POT-51C is especially suitable for preparatory lead free soldering of relatively large parts, solder-dipping of large terminals, urethane wires, connectors, and big wire leads. The POT-76C is a ceramic solder bath and is recommended for larger components where lead free is needed.

Only 110V available. call for availability

Play lead free soldering pot video clip

Video transcript: The following is a transcript of the above video clip about Goot lead free soldering pots.

POT-50C, 51C, 75C, and 76C are lead free applicable square solder baths. POT-50C and 75C have solder baths that can withstand erosion. POT-51C and 76C have ceramic solder baths that will not erode when using lead free solder.

The digital control panel displays the set temperature and the measured temperature simultaneously making extremely accurate temperature control easy. The long life, high insulation ceramic heater minimizes electrical current leakage during work making it safe even for delicate components. POT-50C and 51C are high temperature type solder baths for transformer lead insulation removal and preparatory soldering. POT-75C and 76C have large solder baths designed for soldering PCBs and other large components. All pots in this series can be connected to a computer using the smart loader for easy monitoring and control of the solder bath temperature and the control panel settings.

The new pot series is for the new generation of lead free soldering and makes all kinds of soldering possible.

Perfect Temperature: PID temperature control minimizes deviation of solder or setting temperature.
Dual Display: Dual digital temperature display shows set temperature and measured temperature values at the same time.
Extremely Accurate: Extremely accurate setting value and measured value at very minimal tolerance as {(display value x 1.25%)+1C}.
Ceramic Solder Bath: Recommended for lead free solder.
Preparatory Soldering (patent pending): Suitable for preparatory soldering of relatively large parts, solder-dipping of large terminals, urethane wires, connectors, and big lead wires.
Warning Lamp: Warning lamp to detect any deviance from set temperature range.
Separated Structure: Separated structure of solder bath and heater allow simple replacement of each part.
Compliant with ISO 9000 series.
Equivalent to IPC/EIA J-STD-001C.

Set (SET) key
- To register set value.
- To change modes and parameters.
- To change PV, SV display mode or the parameters setting mode.
Setting digit shift key
- To change set value, move the cursor to the digit to be changed.
Setting value decrement key
- For decreasing value when changing set value.
Setting value increment key
- For increasing value when changing set value.
Measured value (PV) display panel (Green)
- Displays measured value (PV).
- Displays parameter symbol in setting mode.
Setting Value (SV) display panel (Orange)
- Displays set value (SV).
- Indicates set value of parameter symbol shown on (PV) display
  panel in setting mode.
Control output lamp (Green)
- Lights up when control output is ON.
Auto-tuning (AT) lamp (Green)
- Flickers in auto-tuning mode.
Alarm (ALM) lamp (Red)
- Lights up when alarm is ON.

Dual digital temperature display

Specifications:

Model No.	POT-51C
Voltage	110V
Power Consumption	470-610W, 370-430W (When Stabilized)
Inrush Current	25A, 11A (at solder temp. 25°C)
Solder Bath Temperature	Room temp-530°C
Unit Dimensions	174(W) x 285(D) x 142(H)mm
Solder Bath Dimensions (internal)	50(W) x 50(D) x 50(H)mm
Weight	Approx. 3kg
Maximum Solder Volume	Approx. 850g
Solder Bath Material	Ceramic
Set Accuracy	ą{(1.25% of display temperature)+1°C}
Power Cord	1.5m (3 core cable) ground plug