 |
 TWZ60 Optional Tweezers for SMD Rework
- The TWZ60 is an optional feature that is specially designed for SMD chips, SOT, flat pack IC's, and surface mount electrolytic capacitors.
- Ceramic Elements: Long life, high insulation heating elements.
- Direct Heat: Puts the heat where you want it without affecting the surrounding components.
- Heater Output: 24Va.c.
- Heater Power: 60W (2x30W).
- Temperature: 150°C - 430°C (320°F - 830°F).
- Standard Tip: 46-060102 (TZ02).
- Compatible Xytronic Stations: 136, 136ESD, 137ESD, 988, and 988D.
List Price: $99.99. Our Price: $79.95. You save $20.04.
|
| Tweezer Tips for TWZ60 |
| |
 |
|
|
|
|
|
 HAP60 Optional Hot-Air Pencil for SMD Rework
- The HAP60 is an optional feature that provides a fast and efficient method to remove and/or re-flow small surface mount devices.
- High preformance yet inexpensive.
- Non-burning sillcone rubber cable.
- Heater Output: 24Va.c.
- Heater Power: 60W.
- Maximum Temperature: 350°C (662°F).
- Compatible Xytronic Stations: 968, 988, 988D & 999SD-A (from June 1st, 1999).
List Price: $99.99. Our Price: $59.95. You save $40.04.
|
|
|
|
 426DLX Xytronic Fume Extractor Play Video Clip (Solder fumes extracted with 426DLX)
In the above video watch solder fumes being extracted with the Xytronic 426DLX fume extractor.
- Built in high efficiency, low noise, brushless mini fan.
- Easy to replace activated carbon filter. Effectively absorbs noxious flux and lead fumes.
- Quickly removes smoke and fumes.
|
Flux is an integral part of the soldering process to prepare the work surface. Composed of rosin-resin and mixed with an activator (halogen organic agent) that, as the temperature increases, generate noxious components such as salicylic acid and pinene commonly seen as smoke rising from the work area.
High content ratios of resin generate phinol (C6H5OH) and the activators can emit hydrogen chloride (HCL) and other compounds. The US Government has occupational hazard standards controlling the permissible amounts of such compounds in the work area and the 426DLX fume extractor when used properly, helps to meet these standards.
The 426DLX fume extractor offers a convenient and space saving method of removing noxious fumes from the work environment. Designed for use on the factory floor, in R&D or by the hobbyist, this product provides an economical and efficient method to improve the work place by eliminating headaches, nausea and eye irritations often associated with exposure to solder fumes.
426DLX was developed with a high performance fan and an easy to replace activated carbon filter.The filter is made by joining specific foam with refined activated carbon. The activated carbon has a surface area of 1250 m square/gram and the total weight of the filter is 500 grams/meter square. The dust collection efficiency of the filter is 30% while the carbon filter can absorb up to 30% of its carbon weight in noxious components. in stock
Fume Extractor Specifications:
| Model No. |
426DLX |
| Input power |
110V |
| Wattage |
20-22W |
| Max. air volume |
95/115 CFM |
| Outer dimensions (W x H x D) |
162 x 200 x120 mm (6.38 x 7.78 x 4.72 in) |
| Weight (excluding AC cord) |
1600 grams (3.5 lbs.) |
| Filter size |
130 mm2 |
| Filter weight |
12 grams |
|
|
